2 Arm Pneumatic Vibrator

It is used to compress the refractory material from the edge of induction furnaces. It is preferred for induction furnaces between 2 tons and 15 tons. Thanks to its adjustable pistons, it can be used in induction furnaces of different capacity ranges with a single machine. Thanks to its spring mechanism and rotation around its own axis, it scans the entire surface evenly and ensures uniform compression.

• - Compacts the refractory material with equal density, causing similar penetration of the molten material into the internal surface of the refractory.
• - Eliminates risks such as cracks and gas pockets in the refractory.
• - Completes the compaction operation in a very short time.
• - Extends the life of the refractory.
• - Enables more efficient and economical use of labor.
• - Allows for more casting with time savings.

WORKING PRESSURE: From 2 bars to 6 bars (from 29 psi to 87 psi). Lubricated and filtered air is required.
WORKING TEMPERATURE: From -20°C to 200°C (from -4°F to 392°F)